Storage; Unpacking; Setting Up - PLUSOPTIX PowerRef 3 Instruction Manual

2.1 Storage

The plusoptiX R09 device can be stored in the original package when the storage room
fulfils the following requirements:
Temperature:
Humidity:
Keep the plusoptiX R09 device away from any heat source.

2.2 Unpacking

Open the carton only in position „This side up".
After unpacking the plusoptiX R09 please check that all items are delivered which are
listed on the delivery note. Missing items can only be replaced when a claim has been
forwarded to the company you have the device purchased from within one week after
accepting the delivery.
Note: Please keep the original packing material in case later transportation may be
required.
Do not store the packing material in a room with an open fire place.

2.3 Setting up

When you set up the plusoptiX R09 make sure that no cable can be reached by
Probands.
Protect the plusoptiX R09 from direct sunlight.
0°C to +50°C (32°F to 122°F)
10% to 85% (no condensation)
Page 7 of 34