Receiving Multicast Paging; Managing A Paging Call - Yealink SIP-T54S User Manual

Yealink T5 Series IP Phones User Guide
You need to set a Paging List key in advance.
Procedure
1. Press the paging list key when the phone is idle.
2. Select a desired paging group.
3. Press Paging to send RTP.
Both your phone and receiver's phone play a warning tone and the multicast RTP session will be automatically
answered on the receiver's phone in the speakerphone (hands-free) mode.
Related Topics
Setting a Paging List Key

Receiving Multicast Paging

You system administrator has set a listening paging group for you, and then you can receive a paging call when the
phone is idle. The paging call is automatically answered on your phone.
When there is a voice call or a paging call in progress, or when DND is activated on your phone, the phone handles the
new paging call differently which depends on multicast listening settings configured by your system administrator.

Managing a Paging Call

During a paging call, you can do the following:
Press Hold to place the current paging call on hold.
l
The paging call is placed on hold and receiver's phone releases the session.
Press Resume to resume the held paging call.
l
The multicast RTP session is re-established.
Press End Call to end the paging call.
l
84