Resetting The Base Station; Resetting The Handset; Triggering The Auto Provisioning - Yealink W59R User Manual

1. Go to OK > Settings > System Settings > Base Restart.
2. Enter the system PIN (default: 0000), and then press Done.
After the above steps, the registration LED and network status LED on the base station go out simultaneously. After a
period of time, the LED indicators will glow green again when the base station restarts successfully.

Resetting the Base Station

Your system administrator may ask you to reset your phone to factory after you have tried all troubleshooting
suggestions but still do not solve the problem.
Except the handset registrations, the phone will reset all settings to the factory defaults after the resetting. Check with
your system administrator if the personalized settings are kept before resetting your phone to factory.
1. Go to OK > Settings > System Settings > Base Reset.
2. Enter the system PIN (default: 0000), and then press Done.
3. Select Reset to factory.
A message prompts whether to reset the base.
All individual settings of the base station will be reset to factory defaults. The power LED indicator and network LED
indicator on the base station slowly flash in sequence during the resetting. LEDs on the base station glow green after
startup.
Important: Base station reset may take a few minutes. Do not power off until the base station starts up
successfully.

Resetting the Handset

You can reset individual settings that you have configured on the handset.
Except the settings of directory, call history, voice mail, and the handset registration, the handset will reset all
customized settings to factory after the resetting.
1. Go to OK > Settings > System Settings > Handset Reset.
The phone prompts you whether to reset the handset.
2. Confirm the action.

Triggering the Auto Provisioning

Your system administrator may ask you to update your phone configurations. You can trigger the auto provisioning
using the wizard.
1. Go to OK > Settings > System Settings > Auto Provision.
2. Enter the system PIN (default: 0000), press Done.
3. Enter the user name, select OK.
4. Enter the password, select OK.
The phone prompts whether to update immediately.
5. Confirm the action.
| Maintaining Your Phone | 44