Page 1
DECT IP Phone – W60B & W56H 14 February 2020 QUICK START GUIDE DECT IP Phone W60B & W56H For W60B firmware 77.81.0.30 or later For W56H firmware 61.81.0.30 or later Version 1.0 Developed by: BUROSERV Australia Level 2, 9 Help Street Chatswood NSW 2067. Australia...
DECT IP Phone – W60B & W56H W60P PACKAGE CONTENTS Note: • Yealink W60P DECT IP phone consists of one W60B base station and one W56H handset. W56H PACKAGE CONTENTS Note: • We recommend that you use the accessories provided or approved by Yealink.
PoE (Power Over Ethernet) Option Note: • If you choose Method a, use Yealink supplied power adapter (5V/600mA). A third-party power adapter may damage the base station. • If you choose Method b, you do not need to connect the power adapter.
Page 5
DECT IP Phone – W60B & W56H 2b. (Wall-Mount Installation) Attach the base station. 3. Insert the battery into the handset. 4. Attach the Belt Clip. 5. (Optional) Mount the charger cradle to the wall. Quick Start Guide...
Page 6
DECT IP Phone – W60B & W56H 6. Connect the charger cradle and charge the handset. Note: Use Yealink supplied power adapter (5V/600mA). A third-party power adapter may damage the handset. • • Check the charging status on the top right corner of the LCD screen.
8 handsets on the W60B. HANDSET REGISTRATION You can register up to 8 handsets to one W60B base station. Each handset can be registered to 4 different base stations. When the handset LCD screen prompts “Unregistered!”, long press on the base station till the registration LED flashes.
DECT IP Phone – W60B & W56H NETWORK SETTINGS You can configure the base station to obtain network settings in one of the following ways: DHCP: By default, the base station attempts to contact a DHCP server in your network to obtain the valid network settings, e.g., IP address, subnet mask, gateway address and DNS address.
DECT IP Phone – W60B & W56H VOLUME ADJUSTMENT To rename the handset: • Press when the handset is idle to adjust the ringer volume. • Press during a call to adjust the receiver volume of speakerphone/earpiece/earphone. RING TONES 1. Press the key to enter the main menu, and then select Settings->Audio->Ring...
DECT IP Phone – W60B & W56H BASIC CALL FEATURES PLACING CALLS To place a call directly: 1. Do one of the following: • Enter the desired number when the handset is idle. • Press to enter the pre-dialing screen.
DECT IP Phone – W60B & W56H CALL HOLD AND RESUME To place a call on hold: Options soft key during a call, and then select Hold. Press the To resume a call, do one of the following: • If there is only a call on hold, press the Resume soft key.
Page 12
“Easy collaboration, high productivity.” The company’s high-quality UC terminal solutions enhance the work efficiency and competitive advantages of its customers in over 100 countries. Yealink is the world’s second-largest SIP phone provider and is number one in the China market.
Need help?
Do you have a question about the W60B and is the answer not in the manual?
Questions and answers
Do you have to have a base station, can you not plug into a router on full fibre
The Yealink W60B requires a base station. It cannot connect directly to a router on full fiber without the base station.
This answer is automatically generated