Setting The Eco Mode; Setting The Repeater Mode; Audio Settings; Silent Mode - Yealink W59R User Manual

Dect ip phone
Hide thumbs Also See for W59R:
Table of Contents

Advertisement

Setting the Eco Mode

Using the eco mode can greatly reduce the transmission power and signal output when the handset is during a call.
The attenuation range is 20m. When the distance between the base station and the handset is over 20m, the eco mode
is disabled automatically. If the eco mode is enabled, the radio coverage of the base station will be reduced.
1. Go to OK > Settings > System Settings > Eco Mode.
2. Select Change.

Setting the Repeater Mode

Using the repeater mode can extend the radio coverage of the base station. This feature gives you more mobility in
large dwelling.
If the repeater mode is enabled, and a repeater is registered to this base station, the handset registered to the base
station can be used either within the range of the base station or the repeater. It provides users with greater freedom of
mobility.
For more information on how to use DECT repeater with the base station, refer to
Guide.
Repeater mode and eco mode+ features cannot be used at the same time.
1. Go to OK > Settings > System Settings > Repeater Mode.
2. Select a desired repeater and press OK.
The handset prompts whether to reboot this base station.
3. Confirm the action.
The base station reboots to make the change take effect. The change is applied to all the handset registered to the
base station.
Related tasks
Setting the Eco Mode+

Audio Settings

You can change the basic audio settings on your phone.

Silent Mode

You can enable the silent mode if you do not want to be disturbed. The handset will not ring when receiving an
incoming call, but it will still display the incoming call information.

Switching on Silent Mode

You can silence an incoming call by switching on silence mode to stop your phone from ringing.
Long press the * key until the phone prompts "All Ring Tones Off".
The silent icon
appears in the status bar.

Switching off Silent Mode

If you want to resume the incoming ring, you can switch off silent mode.
| Audio Settings | 40
Yealink DECT Repeater User

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

W60bW53pW60p

Table of Contents