Receiving Multicast Paging; Managing A Paging Call; Advanced Call Features - Yealink W70B User Manual

Procedure
1. Go to OK > Call Features > Paging.
On the CP930W/DDPhone, go to Menu > Features > Paging List.
On the CP935W, go to More > Features > Paging List.
If your system administrator has set only one paging list, the paging is sent directly.
2. Select the desired paging group.
3. Select Paging.
On the CP935W, select the desired paging group directly.
Note: Multicast RTP is the one-way paging only from the sender to the multicast address(es)
(receiver). For outgoing RTP multicasts, all other existing calls on the phone will be placed on
hold.

Receiving Multicast Paging

Your system administrator has set a listening paging group for you, you can automatically receive a paging
call when the phone is idle.
When there is a voice call or a paging call in progress, or when DND is activated on your phone, the phone
handles the new paging call differently according to the multicast listening settings configured by your
system administrator.

Managing a Paging Call

During a paging call, you can manage it manually at any time.
Procedure
You can do the following:
Select Hold to place the current paging call on hold.
•
The paging call is placed on hold and the receiver releases the session.
• Select Resume to resume the held paging call.
The multicast RTP session is re-established.
• Select End to end the paging call.
On the CP935W, select

Advanced Call Features

By using the advanced features, your handset would perform more functions that make your work more
efficiently.
If you require additional information or assistance with your new phone, contact your system administrator.
• Call Park and Call Retrieve
• Shared Call Appearance (SCA)
• Voice Mail
.
| Advanced Call Features | 66