Ending Calls; Muting/Unmuting Audio; Holding And Resuming Calls; Holding A Call - Yealink W59R User Manual

2. Select the desired line, and then press OK.
3. Enable DND.
4. Confirm the action.
The status bar displays the DND icon.
You can press the Line soft key when the handset is idle to check the line status.

Ending Calls

You can end the current call at any time.
Press or End.

Muting/Unmuting Audio

You can mute the microphone during an active call so that the other party cannot hear your discussion with your
colleagues.
1. Press the mute key during a call to mute the microphone.
The mute icon appears on the phone screen.
2. Press the mute key again to unmute.
The mute icon disappears from the phone screen.

Holding and Resuming Calls

You can place an active call on hold and resume the call when you are ready. When you place a call on hold, the held
party may hear the music played by its sever.

Holding a Call

You can place an active call on hold on your phone.
During a call, select Options > Hold.
Note: When you have multiple calls on the phone and the current call is held, you can press the up or down
navigation key to swap to the active call.

Resuming a Held Call

You can view and resume a held call on the phone.
Select Resume.
If multiple calls are placed on hold, select the desired call first.
Note: When you have multiple calls on the phone and the current call is active, you can press the up or down
navigation key to swap to the held call.

Call Forward

The handset will forward incoming calls to another party according to the forwarding type.
There are three forwarding types:
• Always Forward: Incoming calls are immediately forwarded. There is no prompt on the phone screen when the
line receives an incoming call.
• Busy Forward: Incoming calls are forwarded when the line is busy.
| Call Features | 22