Ricoh BR-C1a Basic Service Training page 9

Rules About Installing Peripherals
 Either of the two LCITs can be installed on the right side of
the main machine.
 The Multi Bypass Tray can be installed on top of either
LCIT.
 The Decurl Unit is installed inside the main machine.
 Either the Perfect Binder or the Ring Binder can be
installed, but these units cannot be installed together at the
same time.
 If the Multi Folding Unit is installed, the Booklet Finisher or
Finisher must be installed as the last unit downstream.
 The Trimmer Unit can be attached only to the Booklet
Finisher, not the Finisher.
 The booklet tray of the Booklet Finisher must be removed
in order to install the Trimmer unit.
 If the Trimmer Unit is not installed, the booklet tray of the
Booklet Finisher must be installed.
Slide 9
No additional notes
9
BR-C1 Training