Slide 412
No additional notes
Bottle Full Sensor
Normally, the used toner bottle
sensor switches on/off
repeatedly during the rotation of
the coils.
When the used toner bottle
becomes full, the load on the
transport coils means that the
torque limiter on the drive gear
cannot turn.
So, the sensor stops switching
on/off. If this condition
continues for longer than 3
seconds, the bottle is full.
The machine stops. If there is
The capacity of the used toner
bottle is about 1200 K sheets.
412
a job in progress, it will stop
immediately and an alert will
appear on the operation panel.
BR-C1 Training