Table of Contents
Advertisement
1. Main Relay Sensor
2. Registration Entrance Sensor
3. LCT Relay Sensor
4. Double-feed Sensor (Emitter)
Slide 334
1. Main Relay Sensor: Monitors movement of paper to check for paper jams.
2. Registration Entrance Sensor: Monitors movement of paper to check for paper
jams.
3. LCT Relay Sensor: Monitors movement of paper to check for paper jams.
4. Double-feed Sensor (Emitter): Mounted below the double-feed sensor
(receptor), the paper passes through the gap between these two sensors for the
double-feed check.
5. Double-feed Sensor (Receptor): Mounted above the double-feed sensor
(emitter), the paper passes through the gap between these two sensors for the
double-feed check.
6. Registration Timing Sensor: Determines the timing of the rotation of the
registration gate roller to stop paper in the paper path, also checks for paper
jams.
7. CIS: Checks paper position in the path to determine the amount of correction
needed for side-to-side registration.
8. Transfer Timing Sensor: Monitors paper movement for jam detection and
controls the timing of paper release to the PTR unit.
Sensors
5. Double-feed Sensor (Receptor)
6. Registration Timing Sensor
7. CIS
8. Transfer Timing Sensor
334
BR-C1 Training
Advertisement
Table of Contents
