Slide 339
The registration timing roller [D] feeds the leading edge against gate of the gate
roller (which has stopped) to straighten the leading edge.
After skew correction, the paper feed rollers briefly release the paper, and the
shift rollers grip the paper and adjust the position of the paper for main scan
registration.
Roller Release - 2
The rotary gate motor [E]
controls these mechanisms.
The raising and lowering of
the rotary gate roller [A] is
driven by a cam [B] attached
to the shaft drive roller [C].
The raising and lowering of
the registration timing roller
[D] is controlled by three
gears that rotate cam [F]. The
lever [G] attached to the cam
raises drive roller [H] to
separate it from the timing
roller [D].
339
BR-C1 Training