Ricoh BR-C1a Basic Service Training page 171


Take the NVRAM off the new board and install it on the new board.
 The semi-circular mark on the NVRAM must point up.

Do the following SPs:
 5-811-004: Input the serial number.
 5-131-001: Paper size type (USA or EU)
 5-807-001: Area selection (Destination setting)

After re-assembly, cycle the machine off/on.
Slide 171
 The machine has three NVRAMs. There are two on the controller board, and one
on the BCU.
Replacement
BCU Board
171
BR-C1 Training