When removing or replacing the ITB cleaning unit, keep it straight and do
not allow it to tip to the right (rear side when in the machine).
The lubricant roller, lubricant bar, and lubricant blade are always replaced
as one set.
When removing and re-installing blades, work carefully to avoid
damaging the sponge seals at the ends of the blade.
These sponge seals cannot be replaced in the field.
After replacing the ITB, do the procedure in the service manual.
Replacement and Adjustment > ITB Cleaning Unit > ITB Cleaning Unit
The procedure is summarized on the next two slides.
Slide 385
No additional notes
Replacement and Adjustment
Servicing the ITB Cleaning Unit
Disassembly > ITB Cleaning Unit Re-installation
385
BR-C1 Training