Functional Test; Maintenance; Intervals - Weinmann ULM CASE I Description And Instructions For Use

7 Functional Test

8 Maintenance

8.1 Intervals

12 Functional Test
EN
Carry out a functional test of the case after each use (or at
least every two years if the case is not used). If you disco-
ver an error during the test, you are not permitted to use the
emergency case again until the error has been resolved.
Follow these instructions for a functional test:
1. Make sure the inserts, cover, ampoule holders, case
corners and the handle are not damaged.
2. Check that the case locks are easy to open and close.
3. Make sure the case hinges and cover can be moved
easily and are correctly secured.
Replace defective parts.
The emergency cases are maintenance-free. Observe the
intervals for regular functional tests (see Section "7 Functio-
nal Test" on page 12).
We recommend allowing the manufacturer's (Weinmann)
expert personnel to carry out maintenance and repairs.