Fault Diagnostics; Error Codes (Service / Customer) - Bosch SHP65TL5UC Repair Instructions

6

FAULT DIAGNOSTICS

6.1

Error codes (service / customer)

6.1.1 Entering the error code program
• If the dishwasher needs to be reset, turn it on and off
again. The dishwasher must be off to enter the program.
• While pressing and holding both the "B" and "C" buttons
(below), press and hold the On / Off button (to turn the
dishwasher on) until the display shows "P0". Release all
buttons.
• Program "P0" is the error code program.
6.1.2 Viewing error code displays
• Press the "C" button (below) to start the error code
program.
• The program shows both the storage location of the error
code ("C:00 – C:07") and the error codes themselves
("E:00 – E:30):
o To view storage locations, press and hold the "C"
button.
o To view error codes, release the "C" button.
702_58300000170749_ara_en_c This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary
information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.
6.1.3 Exiting the error code program
• Turn the dishwasher off to exit the program.
Page 65 of 82