Water Valve - Bosch SHP65TL5UC Repair Instructions

5.4.2 To remove door latch
Tools needed: Flat blade screwdriver and pliers.
1. Disconnect & pull out dishwasher – section 5.1.5.1.
2. Remove door latch by carefully prying tank tabs and lifting
the latch up and away from the tabs (below).
HINT: When replacing a door latch:
• Make sure the door latch is aligned, is held securely
and the sensor detects the door latch magnet.
• Misaligned latches can prevent dishwashers from
starting. If the dishwasher won't start, check the door
latch alignment.
5.5

Water valve

Access the water valve from the rear of the dishwasher base by
pulling out the dishwasher.
702_58300000170749_ara_en_c This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary
information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.
5.5.1 To remove water valve
Tools needed: Flat blade screwdriver and pliers.
1. Disconnect & pull out dishwasher – section 5.1.5.1.
2. To gain slack to pull out water valve, loosen hose clamp
from water inlet hose and pull water inlet hose from
water inlet control (below).
3. Push up latch and carefully pull water valve and mounting
bracket up and away from base (below left).
Page 50 of 82