Bosch SHP65TL5UC Repair Instructions page 61

CAUTION: Take care to not lose the regeneration
valve spring when removing the valve coil or body.
4. To remove the valve body, place a small blade screwdriver
into it and carefully pry it out from the softener (below).
702_58300000170749_ara_en_c This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary
information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.
5.19.2 Assembling regeneration valve
When assembling / reassembling the regeneration valve, line up
the marks on the valve body and coil (below). When the marks
are aligned, carefully press the body with spring into the coil until
the parts come together.
CAUTION: The regeneration valve body, spring and coil
must be properly reassembled to avoid damage.
5.19.3 Removing water softener
Tools needed: #2 Phillips & small flat blade screwdrivers, along
with special tool part # 341805.
1. Flip dishwasher for bottom access – section 5.1.6.1.
2. Disconnect regeneration valve wire harness (below).
Page 61 of 82