Attaching Mounting Brackets; Installing Toe Kicks - Bosch SHP65TL5UC Repair Instructions

2.6

Attaching mounting brackets

Top mounting is used for countertops made of wood or other
materials that can be easily drilled. Side mounting is used for
countertops made of marble, granite, or other hard materials that
cannot be easily drilled.
2.6.1 Attaching mounting brackets to dishwashers
• Mounting brackets have a tab to be inserted into tank flange
slots. Use the taller slots on the outside of tanks, not the
shorter slots inside of those "outside" slots.
• Insert the bracket tab into the correct slot and snap the
bracket down into the tank.
702_58300000170749_ara_en_c This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary
information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.
• Crimp the bracket tab downward with pliers to fix the bracket
in place.
2.7

Installing toe kicks

Depending on the model, toe kicks may or may not have
mounting brackets. Toe kicks without mounting brackets are
screwed directly into the dishwasher base.
• For dishwashers with mounting brackets, slide brackets into
dishwasher base and fasten with supplied screws.
• Tilt top of toe kick up behind outer door and drop bottom of
toe kick in place next to mounting brackets or dishwasher
base.
• Fasten toe kick in place with two (2) supplied Phillips #2
screws.
• Snap decorative plastic screw caps over screw heads.
Page 10 of 82