Bosch SHP65TL5UC Repair Instructions page 73

6.1.8 Error code E:25 for loose drain pump cover
If a dishwasher doesn't drain properly and / or shows an E:25
error code, the problem could be the drain pump cover wasn't
replaced properly (i.e. not completely seated and locked into
position). Loose drain pump covers allow more water flow to the
drain pump, increasing the pump load, drawing more current and
causing an E:25 error code.
The Clean light can come on, giving the impression the
dishwasher finished it's cycle when it actually didn't.
Occasionally E:23 and E:24 error codes can occur as well.
1
CAUTION – 80% of all controls returned
for analysis check out OK.
issues are due to loose connections and
error codes for other parts.
702_58300000170749_ara_en_c
1. Drain pump cover
Most control
This material is intended for the sole use of BSH authorized persons and may contain confidential and proprietary
information. Any unauthorized review, use, copying, disclosure, or distribution in any format is prohibited.
Page 73 of 82