8
Test Functions
ASTM Drift and Noise Test
ASTM Drift and Noise Test
The ASTM Drift and Noise test determines the detector noise over a period of 20
minutes. The test is done with HPLC-grade water flowing through the flow cell at
1 mL/min. On completion of the test, the noise result is displayed automatically.
1 Run the ASTM Drift and Noise Test with Agilent Lab Advisor (for further
Agilent InfinityLab LC Series VWD User Manual
information see Online- Help of user interface).
Figure 30
ASTM Drift and Noise Test – Results
Figure 31
Drift and Noise Test – Signal
112