Connecting The Base Unit And Expansion Modules - Pilz PNOZ ml1p Operating Manual

Installation
5.3

Connecting the base unit and expansion modules

Connect the base unit and the expansion module as described in the operating instructions
for the base units.
Do not connect a terminator to the last expansion module on the left-hand side.
}
Install the expansion module in the position in which it is configured in the PNOZmulti
}
Configurator.
The position of the expansion modules is defined in the PNOZmulti Configurator. The ex-
pansion modules are connected to the left or right of the base unit, depending on the type.
Please refer to the document "PNOZmulti System Expansion" for details of the number of
modules that can be connected to the base unit and the module types.
Operating Manual PNOZ ml1p
21575-EN-06
16