Instrument Setup; Standard Delivery; Installation Site Requirements - Leica RM2235 Instructions For Use Manual

4.1

Standard delivery

The Leica RM2235 standard delivery includes:
The accessories ordered are included
in a separate box.
Carefully check the delivery against
the packing list and the delivery note.
Should you find any discrepancies,
please contact your Leica sales office
without delay.
Leica RM2235
1 Leica RM2235 basic instrument
1 handwheel, complete ................................................................. 14 0500 38181
1 section waste tray ....................................................................... 14 0502 37931
1 tool set, consisting of: .................................................................. 14 0500 38600
1 Allen key with handle No. 5................................................... 14 0194 04760
1 Allen key with handle No. 4................................................... 14 0194 04782
1 Allen key No. 3 ........................................................................ 14 0222 04138
1 screwdriver 3x50, 186 long .................................................... 14 0170 11568
1 bottle (50 ml) of oil for drives, type 405 ................................ 14 0336 06086
1 brush w/magnet ...................................................................... 14 0183 40426
1 dust protective cover ................................................................... 14 0212 30350
1 Instructions for Use, printed (German/English,
with Language CD 14 0500 80200) ........................................... 14 0500 80001
4.2

Installation site requirements

• Stable, vibration-free laboratory table with
horizontal, flat table top, as far as possible
vibration-free ground.
• No other instruments nearby which might
cause vibrations.
• Room temperature consistently between
+ 10 °C and + 35 °C.
• Obstruction-free access to the handwheel.
Never operate the instrument in rooms
with an explosion hazard.
4.

Instrument Setup

13