Table of Contents
Advertisement
4
Instrument Setup
4.
Instrument Setup
4.1
Standard delivery
The Leica SM2010 R standard delivery includes:
Qty
1
Leica SM2010 R basic instrument
1
Section waste tray
1
Tool set consisting of
1
Allen key size 6
1
Allen key with handle, size 4
1
Allen key T 25
1
Open-end wrench, size 10
1
Spare magnet
1
Dust protection cover
1
Pair of safety gloves, size S
1
Instructions for Use (printed English with language CD 14 0508 80200).
Note
The accessories ordered are included in a separate box.
Carefully check the delivery against the packing list and the delivery note. Should you find any
discrepancies, please contact your Leica sales office without delay.
4.2
Site requirements
• Stable, vibration-free laboratory table with horizontal, flat table top, as far as possible vibration-free
ground.
• No other instruments nearby which might cause vibrations.
• Room temperature consistently between + 10 °C and + 40 °C.
• Free access to coarse driving wheel and knife sledge.
• The instrument is suitable for operation in enclosed rooms only.
4.3
Unpacking
Note
First check the shipment for external damages upon arrival.
If it is evident that the shipment was damaged during transport, please make a claim to the carrier
immediately.
• Open the packaging.
• Remove all foam material.
• Take out all accessories and the instruction manual.
16
Designation
Order No.
14 0508 42258
14 0508 42328
14 0508 42983
14 0194 43634
14 0194 04782
14 0194 45250
14 0330 04158
14 0508 44762
14 0212 18961
14 0340 40859
14 0508 80001
Version 1.8, Revision I
Advertisement
Table of Contents
