Instrument Setup; Location Conditions; Standard Delivery - Leica HI1210 Instructions For Use Manual

4.

Instrument Setup

4.1

Location conditions

• When installing the power cable, always be sure to route it so that it cannot contact the
heated surfaces of the instrument at any time.
• The power socket to which the instrument is to be connected to has to be located near the
instrument and easily accessible.
• The power supply must be at a distance no greater than the length of the power cable – an
extension cable must NOT be used.
• The substrate must be largely vibration-free and have sufficient load capacity and rigidity
for the weight of the instrument.
• Avoid impacts, bright direct light, and excessive temperature fluctuations.
• The instrument must be connected to a suitable power socket.Use only the provided power
cable, which is intended for the local power supply.
4.2

Standard delivery

The Leica HI1210 standard delivery includes:
1 Leica HI1210 basic instrument
1 Dust cover ........................................................................................................................ 14 0415 41178
1 Set of fuses:
2 fuses, T2.5A ............................................................................................................... 14 6943 02500
2 fuses, T5A .................................................................................................................. 14 6943 05000
1 Instructions for Use, printed (English,
with Language CD 14 0415 80200) .............................................................................. 14 0415 80001
The country specific power cord needs to be ordered separately. Please find a list of all power
cords available for your device on our website www.LeicaBiosystems.com within the product
section.
Check the delivery carefully against the packing list, delivery note and your order.
Should you find any discrepancies, please contact your Leica sales office without delay.
10 Instructions for Use V 3.4 RevI – 09/2018