Tier 1 Specifications; Patch Cord Microscope Specifications - Viavi SmartClass Fiber OLTS-85 User Manual

OLTS-85
Tone generator
Laser safety
Laser classification
1) Typically ±20 nm
2) At the output of the EF-TRC. Variations between EF measurement equipment
may occur but EF compliance can be expected with a 95 % confidence factor.
Valid for IEC 61280-4-1 at 850 nm.
3) At constant temperature, after a 20 minute warm-up.

Tier 1 specifications

1)
Testing speed Remote mode
Loopback mode
Pass/fail limit standards
Fiber type
Nominal test wavelengths
Maximum length measurement
Length measurement accuracy
Loss measurement uncertainty
1) Two wavelengths, one direction (excludes referencing and connection times).
2) For multi-mode up to 3 km range, for single-mode up to 10 km range. Link loss
consists only of fiber loss, connector loss and splice loss.
3) After 20 min warm up, at constant temperature, no charging. For multi-mode
loss measurements with 50/125 μm fibers (NA=0.20). For single-mode loss
measurements with 9/125 μm fibers (NA=0.10).

Patch cord microscope specifications

Optical interface
Auto pass/fail analysis standards
Live image
Light source
Lighting technique
Magnification Horizontal
field-of-view
low/high
Vertical
External USB connected P5000i Digital Probe supported.
T
270 Hz, 1 kHz, 2 kHz
IEC 60825-1:2007
CLASS 1 LASER PRODUCT
Multi-mode
TIA 568.3, ISO 11801 and ISO/
IEC 14763-3, link validation
50/125 μm
850/1300 nm
12 km
2)
± 1.5 m plus ± 1 % of length
3)
FMAE LC duplex (many other adapters
IEC 61300-3-35 and custom limits
320 x 240 x 8 bit grey, 10 fps
Blue LED, 100.000+ hours life
12 S
PECIFICATIONS
1
IER SPECIFICATIONS
Single-mode
< 6 s
≤ 3 s
9/125 μm
1310/1550 nm
100 km
< 0.2 dB
available)
Coaxial
740/370 μm
550/275 μm
79