Viavi SmartClass Fiber OLTS-85 User Manual page 55

OLTS-85
Enabling Auto λ mode
To switch Auto λ mode on:
√ The instrument is in Laser mode.
► Tap the [Mode selection]
– or –
1. Press the [A] key.
2. Tap the [More] button.
The menu opens:
3. Tap the [Auto button to set or remove the checkmark.
λ]
The Auto λ mode is on/off.
Note: Signal modulation (270 Hz, 1 kHz, 2 kHz) cannot be
selected when Auto λ is enabled.
To select the Auto-λ-Multi or Serial mode:
If multiple lasers are selected, you have the choice of Multi or
Serial mode:
• Multi: All selected lasers emit simultaneously.
• Serial: The selected lasers emit successively.
7 L
field until Auto λ mode is shown.
O
ASER PERATION
S
ELECTING A MODE
55