Display Elements - Viavi SmartClass Fiber OLTS-85 User Manual

4 B O
ASIC PERATION
D
ISPLAY ELEMENTS
24

Display elements

Fig. 8 Homescreen
Link Data Mode
The saved results of any application are assigned to a dedicated project
and FiberID.
Auto-Off
Indicates whether the instrument turns off within a certain time.
External power supply
The OLTS-85 is powered by the external AC adapter when this symbol
is shown.
Battery status
Indicates the battery charge status. If it is not shown, only the AC
adapter is active.
Active laser source
Indicates when the built-in laser source is active.
Tier 1 Test
To determine the total amount of loss or attentuation of a fiber link.
Powermeter
To install and maintain cables and networks with the broadband power
meter.
Source
To edit the laser for maintanance and characterization of single-mode
and multi-mode networks.
Probe
To view and inspect the bulkhead (female) connectors.
Patch Cord Microscope (only BN 2326)
To view and inspect the patch cord connector of the fiber.
OLTS-85