OLTS-85
Results are stored simply by pressing the [G] key. Each time the
key is pressed, the results will be stored.
Note: If an instrument with integrated patch cord microscope
is connected to a Digital Probe, the images for the PCM
and the Digital Probe will be stored in different folders.
To save current results successively:
√
The instrument is in application mode.
√
Link Data Mode is not activated.
1.
Press the [A] key.
2.
Tap the
[More]
button.
3.
Tap the [Measurement
4.
Press the [A] key.
5.
Tap the
[More]
button.
6.
Tap the [AutoInc
FiberID]
7.
Press the [G] key.
The Fiber ID edit menu is displayed:
8.
Type in the Fiber ID.
9.
Tap the
[OK]
button.
The measurement is stored.
10.Press the [G] key again every time you want to save a an
additional result value.
The display briefly shows the Fiber ID used.
Note: If the Fiber ID is not changed, the data set will be saved
under the same title. Depending on the active
application, the Data can be distinguished by the
Timestamp.
9 M
Data]
button.
button to set the checkmark.
M
EMORY
ANAGEMENT
S
AVING RESULTS
69