Viavi SmartClass Fiber OLTS-85 User Manual page 33

OLTS-85
Test setups can only be set on the local instrument. After
connecting, the settings are transmitted to the remote
instrument.
To distinguish the instruments stick adhesive labels:
Furthermore, there are adhesive labels with Local and Remote
imprint, which serve to distinguish each instrument.
► Attach these adhesive labels on the designated recess of the
dust cap of your instruments.
Fig. 9 Remote/Local adhesive labels
To change the instrument type:
√ The instrument is in Tier 1 Test mode.
1. Press the [A] key.
2. Tap the [More] button.
3. Tap the [Device Type]
To select the cable type:
Each fiber has its own specific parameters. Here you can define
the name, type and index of refraction of your own cable.
Only cables defined here can be selected in the Tier 1 loss test.
√ The instrument is in Tier 1 Test mode.
1. Press the [A] key.
2. Tap the [More] button.
3. Tap the [Manage
4. Tap the desired manufacturer and cable name.
– or –
► To add further cable types, change, or delete existing ones,
press the [A] key and tap the desired button.
To change the length unit:
√ The instrument is in Tier 1 Test mode.
1. Press the [A] key.
5 T
button and choose Local or Remote.
Cables] button.
1 L T O
IER OSS EST PERATION
T 1 L T
IER OSS EST
33