Viavi SmartClass Fiber OLTS-85 User Manual page 22

3 G S
ETTING TARTED
C
ONNECTING OPTICAL CABLES
22
To mount the SENKO test adapter:
√ The optical connectors are properly cleaned (see
test port" on page
1. Open the head cover and remove the protective cap (if still
mounted).
2. Unscrew the SENKO test adapter and pull it off vertically.
3. Place the SENKO test adapter vertically on the optical
connector.
4. Fix the SENKO test adapter with two screws.
5. Repeat the procedure if the instrument is equipped with two
ports.
6. Fit the fiber optic cable to the test adapter or close the head
cover.
Fig. 7 Mounting the SENKO test adapter
75).
"Cleaning the
OLTS-85