Solaris 10 8/07 With Sparc64 Vi Processors; Solaris 10 11/06 - Sun Microsystems SPARC Enterprise M8000 Product Notes

3. 127755-01 - SunOS 5.10: Fault Manager patch
4. 127127-11 - SunOS 5.10: kernel patch
Solaris 10 8/07 OS with patch 127127-11 might panic/trap during normal domain
operation. (CR 6720261
the system specification file (/etc/system):
Then reboot the domain.
In addition, you cannot do a fresh install of the Solaris 10 8/07 OS on a domain that
contains SPARC64 VII processors. The following two workarounds apply:
Create a fully patched image, then use Jumpstart.
■
Start the OS install on a domain that contains only SPARC64 VI processors, add
■
the required patches, then add the SPARC64 VII proce ssors to the domain.

Solaris 10 8/07 with SPARC64 VI Processors

None.

Solaris 10 11/06

Caution – For Sun SPARC Enterprise M8000/M9000 servers running Solaris 10
11/06 OS, patches 123003-03 and 124171-06 must be installed on your system prior
to using Sun Connection Update Manager. These patches are available from
http://sunsolve.sun.com.
The following patches are required for Solaris 10 11/06 OS. Note that Solaris 10
11/06 does not support SPARC64 VII processors, even with these required patches.
Install the patches in the order in which they are listed:
1. 118833-36 – Reboot your domain before proceeding.
2. 125100-10 – See the patch README file for a list of other patch requirements.
3. 123839-07
4. 120068-03
5. 125424-01
6. 118918-24
8 Sun SPARC Enterprise M8000/M9000 Servers Product Notes for XCP 1091 • May 2010
)
set heaplp_use_stlb=0
To prevent this you must set the following parameter in