Sun Sparc Enterprise M8000/M9000 Servers Product Notes For Xcp 1091; What's New In Xcp 1090 And Xcp 1091 - Sun Microsystems SPARC Enterprise M8000 Product Notes

1
C H A P T E R
Sun SPARC Enterprise
M8000/M9000 Servers Product
Notes for XCP 1091
This document covers changes introduced in the XCP 1090 and XCP 1091 firmware
releases. This chapter contains the following sections:
"What's New in XCP 1090 and XCP 1091" on page 1
■
"Minimum Required Firmware, Operating Systems and Browsers" on page 5
■
"Solaris Patch Requirements" on page 6
■
"Upgrading to XCP 1090 or XCP 1091" on page 10
■
"Functionality Issues and Limitations" on page 11
■
"Additional Information and Procedures" on page 14
■

What's New in XCP 1090 and XCP 1091

The XCP 1090 firmware is the first XCP release to support the Airflow Indicator.
■
For more information, see
The XCP 1090 firmware is the first XCP release to support the new XSCF
■
command showdateoffset(8). For details, see the man page.
The XCP 1090 firmware is the first XCP release to support the SPARC64 VII
■
2.88 GHz processor. Earlier XCP firmware releases do not support this faster
version of the processor, which in all other respects is functionally identical to all
SPARC64 VII processors. See
and Browsers" on page
The XCP 1091 firmware introduces the Active Directory and LDAP over SSL
■
features. See
"Airflow Indicator" on page
"Minimum Required Firmware, Operating Systems
5.
"Active Directory and LDAP over SSL" on page
2.
2.
1