Sun Microsystems SPARC Enterprise M8000 Product Notes page 58

Xcp version 1091
Hide thumbs Also See for SPARC Enterprise M8000:
Table of Contents

Advertisement

Solaris OS Issues and Workarounds Fixed in Solaris 10 10/08 (3 of 3)
TABLE 3-5
CR ID
Description
6720261
If your domain is running Solaris 10 5/08 OS,
the system might panic/trap during normal
operation.
6679370
The following message may be output on the
console during system boot, addition of the
External I/O Expansion Unit using hotplug, or
an FMEMA operation by DR.
SUNW-MSG-ID: SUN4-8000-75, TYPE:
Fault, VER: 1, SEVERITY: Critical
...
DESC:
A problem was detected in the
PCIExpress subsystem.
Refer to http://sun.com/msg/SUN4-
8000-75 for more information.
...
46
Sun SPARC Enterprise M8000/M9000 Servers Product Notes for XCP 1091 • May 2010
Workaround
Set the following parameter in the system
specification file (/etc/system):
set heaplp_use_stlb=0
Then reboot the domain.
Add the following to /etc/system, then
reboot the domain.
set pcie_expected_ce_mask = 0x2001

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SPARC Enterprise M8000 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Sparc enterprise m9000

Table of Contents