Solaris Issues Fixed In Solaris 10 10/08 - Sun Microsystems SPARC Enterprise M3000 Product Notes

Solaris OS Issues and Workarounds Fixed in Solaris 10 5/09 (2 of 2)
TABLE 3-3
CR ID Description
6689757 Sun Dual 10 GigE Fiber XFP Low Profile
Adapter (XGF) with a single or improperly
installed XFP optical transceivers might cause
the following error to show on the console:
The XFP optical transceiver is broken
or missing.
6725885 cfgadm will display non-existent M3000
system boards (SB1 to SB15).

Solaris Issues Fixed in Solaris 10 10/08

TABLE 3-4
encounter them if using Solaris 10 5/08.
Solaris OS Issues and Workarounds Fixed in Solaris 10 10/08 (1 of 2)
TABLE 3-4
CR ID Description
6556742 The system panics when DiskSuite cannot read
the metadb
following cards:
• SG-XPCIE2FC-QF4, 4-Gigabit PCI-e Dual-
Port Fiber Channel HBA
• SG-XPCIE1FC-QF4, 4-Gigabit PCI-e Single-
Port Fiber Channel HBA
• SG-XPCI2FC-QF4, 4-Gigabit PCI-X Dual-
Port Fiber Channel HBA
• SG-XPCI1FC-QF4, 4-Gigabit PCI-X Single-
Port Fiber Channel HBA
6608404 Hot-plug of the X4447A-Z, PCI-e Quad-port
Gigabit Ethernet Adapter UTP card might
cause other network devices to fail.
6720261 If your domain is running Solaris 10 5/08 OS,
the system might panic/trap during normal
operation:
20 Sun SPARC Enterprise M3000 Server Product Notes for XCP 1090 • August 2009
lists issues that have been fixed in Solaris 10 10/08 OS. You might
during DR. This bug affects the
Workaround
Check and make sure that both XFP optical
transceivers are firmly seated in the housing.
Do not mix INTEL and Sun XFP optical
transceivers in the same Adapter.
Do NOT plumb a port with the ifconfig
command if the port does not contain an XFP
optical transceiver or it contains one but the
transceiver is not in use.
The cfgadm output for SB1-SB15 can be
ignored.
Workaround
Panic can be avoided when a duplicated copy of
the metadb is accessible via another Host Bus
Adaptor.
There is no workaround.
Set the following parameter in the system
specification file (/etc/system):
set heaplp_use_stlb=0
Then reboot the domain.