Removing Static Electricity On A Cmu And An Iou - Sun Microsystems SPARC Enterprise M8000 Product Notes

FIGURE 2-1
4. To mount a FRU, place it on the grounded antistatic conductive mat. With your
bare hand wearing the antistatic wrist strap, touch the metallic FRU chassis for
5 or more seconds.
When touching the FRU, take care not to damage the parts such as the connector
on the edge of the unit.
Caution – Do not touch the CMU, IOU, or the dummy unit without wearing an
antistatic wrist strap. Failure to do so might result in serious damage to operating
domains.

Removing Static Electricity on a CMU and an IOU

a. Prior to mounting a new CMU or IOU, place it on the grounded antistatic
b. Touch the metallic chassis for 5 or more seconds with your bare hand
24 Sun SPARC Enterprise M8000/M9000 Servers Product Notes for XCP 1091 • May 2010
Antistatic Wrist Strap Showing the Metallic Underside
conductive mat.
wearing the antistatic wrist strap. (See
You cannot remove static electricity by touching the label.
or
FIGURE 2-2 FIGURE 2-3
)