Removing The Unit - Cornelius Nueva Tower Installation And Service Manual

7. Remove the caps from all tubes.
8. Connect all tubes (Fig. 8/1) to the python (Fig. 8/2).
Observe the labels on each individual tube as you connect the tubes.
9. Properly insulate the tubes.
10. Position the drip tray (Fig. 9/3) with grill on the unit; see chapter 7.1.
11. Connect the electrical cable (Fig. 9/2) (cable no. 220097434) to the transformer (Fig. 9/1) in
the undercounter cooler.
12. Put the unit into service ("commissioning"); see chapter 8.1.
5.4

Removing the unit

Prerequisites
The undercounter cooler has been shut down.
The unit has been shut down.
The drip tray has been removed.
Required tools/materials
Tower cable diagram
Undercounter cooler installation and
service manual
1. Disconnect the electrical cable (Fig. 10/2) (cable no. 220097434) on the transformer (Fig. 10/
1) in the undercounter cooler.
2. Disconnect all tubes (Fig. 11/1) from the python (Fig. 11/2).
3. Attach a cap to each tube.
Cornelius Deutschland GmbH
Document no. TD0003100
Version 18/03/2019, Index 0
References
See the document "Undercounter cooler installation and ser-
vice manual"
see chapter 4.1
see chapter 7.1
ID/reference Qty/
amount
220046720 1
Document no. 1
Various
Fig. 8
Fig. 9
Comment
see chapter 11.1
Fig. 10
Fig. 11
Installation and service manual Tower
Installation/removal
1
2
1
3
2
1
2
1
2
Nueva
11