Cancelling Transmission (Disconnection Of Communication) - Kyocera Fax System 10 Operation Manual

Sending Faxes > Basic transmission procedure

Cancelling Transmission (Disconnection of Communication)

Follow this procedure to break the connection and stop communication.
NOTE
Even if transmission is canceled, there is a possibility that pages scanned prior to cancelation were sent to the
receiving party. Check with the receiving party to see if pages were accidentally sent.
When 2 optional FAX Kits (Dual FAX option) are installed, disconnect the line currently being used for communication.
1
2
Select the [Status/Job Cancel] key.
Disconnection of communication.
[Fax Communication Status] > "FAX (Port 1)" or "FAX (Port 2)" [Line Off]
NOTE
To cancel direct transmission, delayed transmission, or polling transmission, refer to the
section for that function.
To cancel direct transmission, refer to the following:
Cancelling Direct Transmission (page 3-29)
To cancel a delayed transmission or send a fax by immediate transmission, refer to the following:
Cancelling Delayed Transmissions (Queued) (page 3-28)
To cancel polling transmission, refer to the following:
Polling Reception (page 5-32)
3-6