Fax Transmission Functions - Kyocera Fax System 10 Operation Manual

Sending Faxes > FAX transmission functions

FAX transmission functions

To configure the settings for functions, select the tab and select the function key.
Function key
Global Navigation
For details on each function, see the table below.
Global Navigation
Configure the
settings for original
size and type.
Configure the
settings for density,
and quality of
copies.
Function key
Original Size Specify the original size to be scanned.
Mixed Size Scan the documents of different sizes that are
Originals set in the document processor all at once.
2-sided/Book Select the type and orientation of the binding
Original based on the original.
Original Select the orientation of the original document
Orientation top edge to scan correct direction.
Sending Size Select size of image to be sent.
Long Original Reads long-sized original documents using a
document processor.
Org. Manual Feed Multi-sheet documents such as slips can be read
(DP) on the document processor whilst still bound
together. When placing a document on the
document processor, place one copy at a time.
Density Adjust density.
Original Image Select original image type for best results.
Fax TX Resolution Select fineness of images when sending FAX.
Description
3-19
Reference
page
3-21
3-21
3-21
3-22
3-22
3-23
3-23
3-23
3-23
3-24