Border Erase/Full Scan - Kyocera Fax System 10 Operation Manual

Sending Faxes > Border Erase/Full Scan

Border Erase/Full Scan

Erases the black border that forms around the image. The following modes are available.
Item
Standard
Full Scan
Border Erase Border
Sheet
Back Page
Border Erase Border
Book
Back Page
Individual Border Border
Erase
Back Page
Original
Orientation
*1 The input units can be changed in System Menu.
Machine's Operation Guide
Value
Read the source document with Standard Mode. (Border Erase Width: 2 mm)
Scan without erasing borders around the original.
Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00 to 2.00"
(in 0.01" increments)
Same as Front Page, Do Not
Erase
Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00 to 2.00"
(in 0.01" increments)
Same as Front Page, Do Not
Erase
Metric: 0 mm to 50 mm
(in 1 mm increments)
Inch: 0.00 to 2.00"
(in 0.01" increments)
Same as Front Page, Do Not
Erase
Top Edge on Top, Top Edge on
Left
3-25
Description
Set the border erase width.
Use [+], [-] or the numeric keys to set the
value.
For 2-sided originals, select [Back Page]
and then select [Same as Front Page] or
[Do Not Erase].
Set the border erase width.
Use [+], [-] or the numeric keys to set the
value.
For 2-sided originals, select [Back Page]
and then select [Same as Front Page] or
[Do Not Erase].
Set the border erase width.
Use [+], [-] or the numeric keys to set the
value.
For 2-sided originals, select [Back Page]
and then select [Same as Front Page] or
[Do Not Erase].
Select the orientation of the original
document top edge to scan correct
direction. Select [Original Orientation] to
choose orientation of the originals, either
[Top Edge on Top] or [Top Edge on Left].
*1
*1
*1