Forwarding Detail Settings; Forwarding Time Setting; File Format Setting - Kyocera Fax System 10 Operation Manual

Using Convenient Fax Functions > Forwarding Detail Settings

Forwarding Detail Settings

Forwarding Time Setting

Register the start time and end time between which forwarding is enabled.
1
2

File Format Setting

If you are sending the file as an E-mail attachment or transferring it to a folder (SMB or FTP), select PDF, TIFF, XPS, or
OpenXPS as the file format.
1
Display the screen.
Use Rule for All Receptions
1
Follow steps 1 of Forward all received documents (Use Rule for All Receptions).
Forward all received documents (Use Rule for All Receptions) (page 5-4)
2
Select [Rule of forward setting] > [Schedule].
Use Rule for Specific RX
1
Follow steps 1 of Forward only received documents that match the conditions (Use Rule for
Specific RX).
Forward only received documents that match the conditions (Use Rule for Specific RX)
(page 5-6)
2
Select [Rule of forward setting] > Select the rule, and select [
3
Select [Schedule].
Configure the function.
1
Select [All Day] or [Preset Time]. If Preset Time is selected, enter the [Start Time] and
[End Time].
NOTE
Enter the time on the 24 hours system.
2
Select [OK].
Display the screen.
Use Rule for All Receptions
1
Follow steps 1 of Forward all received documents (Use Rule for All Receptions).
Forward all received documents (Use Rule for All Receptions) (page 5-4)
2
Select [Rule of forward setting] > [File Format].
Use Rule for Specific RX
1
Follow steps 1 of Forward only received documents that match the conditions (Use Rule for
Specific RX).
5-12
] (information icon).