Default Fax Settings; Operation Method - Kyocera Fax System 10 Operation Manual

Fax Settings > Default FAX settings

Default FAX settings

This section explains the fax settings in the system menu.

Operation method

1
2
3
NOTE
If user login administration is enabled, you can only change the settings by logging in with administrator privileges or
as a user with privileges to configure this setting.
The factory default login user name and login password are set as shown below.
If function default settings have been changed, the [Reset] key can be selected in each function screen to
immediately change the settings.
358ci
408ci
508ci
Display the screen.
Select the [System Menu/Counter] key.
Select a function.
1
3
Configure the function.
1
2
Model Name
1 Displays the System Menu items. Items
that are not displayed can be displayed
by swiping the screen up and down.
2 Returns to the previous screen.
3 Displays setting items.
Select the key of a function to display
2
the setting screen.
4 Returns to the previous screen.
4
1 Returns to the previous screen without
3
making any changes.
2 Enter a setting by selecting it and return
to the previous screen.
3 Accepts the settings and exits.
Login User Name Login Password
3500 3500
4000 4000
5000 5000
8-2