Kyocera Fax System 10 Operation Manual page 67

Sending Faxes > FAX transmission functions
Global Navigation
Configure settings
such as send and
print, delayed
transmission and
polling reception.
Function key
Zoom Scan originals by automatically zooming them
according to the sending size.
Centering Centers the original image on the paper when
copying onto paper different from the original
size.
Border Erase/Full Erases the black border that forms around the
Scan image.
Fax Delayed Set a send time.
Transmission
Continuous Scan Scans a large number of originals in separate
batches and then produce as one job.
Job Finish Notice Sends E-mail notice when a job is complete.
File Name Entry Adds a file name.
Fax Direct Sends FAX directly without reading original data
Transmission into memory.
Fax Polling RX Dial the destination and receive documents for
Polling Transmission stored in the polling box.
Send and Print Allows you to print a copy of the document being
sent.
Send and Store Allows you to store a copy of the document being
sent in a Custom Box.
Fax TX Report Print a report of FAX transmission results.
Detect Multi-fed When reading a document from the document
Originals processor, if the multiple feeding of documents is
detected, then the reading stops automatically.
Detect Stapled When reading a document from the document
Originals processor, if a stapled document is detected,
then the reading stops automatically.
Quiet Mode Lower print and scan speed for quiet processing.
Select this mode when the running noise is
uncomfortable.
Description
3-20
Reference
page
3-24
3-24
3-25
3-26
3-28
3-28
3-29
3-29
5-33
3-29
3-30
3-30
3-30
3-31
3-31