Flow Of Reception; Canceling Reception (Disconnection Of Communication) - Kyocera ECOSYS M6530cdn Operation Manual

Receiving Faxes > FAX Automatic Reception

Flow of reception

1
.
2

Canceling reception (Disconnection of communication)

When you cancel receiving by disconnecting the telephone line during communication, use the following procedure.
1
2
Reception Starts
When a fax comes in, the [Processing] indicator blinks and reception automatically begins.
NOTE
When a telephone (commercially available product) is connected to the machine, reception
starts after the telephone rings.
You can change the number of times the ringing tone rings.
FAX (page 8-6)
Memory Reception
When the machine cannot print a fax due to paper running out or a paper jams, it temporarily
stores originals that have been sent in the image memory. When the machine returns to the
printable state, printing starts.
The number of pages that can be stored depends on the pages. As a general guideline, about
256 or more A4 size pages at normal resolution can be stored.
During memory reception, FAX Reception Printing Jobs are displayed on Printing Jobs of the
Status screen. To print the received originals, supply paper or remove jammed paper.
For the Status screen, refer to the following:
Machine's Operation Guide
Reception Print
Received faxes are output to the inner tray with the printed side facing down.
Display the screen.
Select the [System Menu/Counter] key.
Disconnection of communication.
1
[▲] [▼] key > [FAX] > [OK] key
2
Check the status of communication.
3
Select [Line Off].
When communication is disconnected, reception stops.
4-3