Table of Contents
Advertisement
Connect Network
Connect one end of the network cable to LAN port of TAO 1mini. The
other end of the network cable is connected to the switch. You can also
connect directly to the network port of your computer.
Network Configuration
TAO 1mini and your computer configuration must be in the same LAN.
There are two ways to configure a network. You can turn on DHCP for
automatic capture of IP address, net mask and gateway or configure IP
address, net mask and gateway manually by turning off DHCP. The
detailed operations are as follows.
The first way is to use DHCP to automatically obtain IP.
User should firstly ensure that the switch has access to the network.
Then connect TAO 1mini and the computer to the same switch and in the
same LAN. Finally, turn on DHCP of TAO 1mini, no configuration is needed
for your computer.
Advertisement
Table of Contents
