Assembly And Operation - Fire Sense 1337 Instructions And Parts Manual

To check for leaks:
Your patio heater has been checked at all factory connections for leaks, but you
should always check when you attach the LPG cylinder. To check for leaks, follow
these instructions:
--Assemble all gas connections.
--Connect regulator assembly to the propane tank.
--Make sure the heater valve is turned OFF.
1) Make soapy solution by mixing 1 part liquid dish soap and 3 parts water.
2) Open the propane tank valve.
3) Spoon several drops (or use squirt bottle) of the soapy solution onto the gas
hose /regulator and regulator/cylinder connection.
4) Inspect the connections and look for bubbles.
5) If no bubbles appear the connection is safe.
6) If bubbles appear, there is leakage. Close the propane tank valve, and
loosen and re-tighten this connection.
7) Check for leakage again.
8) If bubbles still appear, close the propane tank valve and contact your gas
supplier. If a leak is detected, DO NOT attempt to use the heater.
MAKE SURE TO CHECK ALL THREE CONNECTIONS BETWEEN THE LPG
CYLINDER AND GAS LINE.
-

ASSEMBLY AND OPERATION

10 -