Do you have a question about the Patio Heater and is the answer not in the manual?
Questions and answers
Gary Parr
February 21, 2025
When assembling patio heater step 6 says to attach reflector stud. There is no hole in the top of the model to attach it to. Help.
1 comments:
Mr. Anderson
May 14, 2025
To attach the reflector stud on the Fire Sense Patio Heater, you need to locate the screw holes at the top of the head unit. If there is no visible hole, make sure you are looking at the correct position on the head unit where the three screw holes are supposed to be. The reflector studs should be attached to these holes. If the holes are missing or not visible, the unit may be defective or assembled incorrectly.
Need help?
Do you have a question about the Patio Heater and is the answer not in the manual?
Questions and answers
When assembling patio heater step 6 says to attach reflector stud. There is no hole in the top of the model to attach it to. Help.
To attach the reflector stud on the Fire Sense Patio Heater, you need to locate the screw holes at the top of the head unit. If there is no visible hole, make sure you are looking at the correct position on the head unit where the three screw holes are supposed to be. The reflector studs should be attached to these holes. If the holes are missing or not visible, the unit may be defective or assembled incorrectly.
This answer is automatically generated