Assembly - Fire Sense 60368 Manual

ASSEMBLY

PREPARATION
Before beginning assembly of this appliance, make sure all parts are present. Compare all parts with package contents list
and hardware contents as listed on page 4 of this manual. If any part is missing or damaged, do not attempt to assemble
this product. Contact ustomer ervice for replacement parts.
ESTIMATED ASSEMBLY TIME: 60 minutes
Tools Required for Assembly (NOT included):
*Sandbox: come with a sandbox
ull open the plastic cap on top of the
plastic cap.
the base with the holes in the sandbox. Insert Large Screws through the holes in the
base and secure by tightening Large Nuts
1
Attach Wheel Assembly
Wheel Assembly with corresponding holes in Base,
and insert 2 Bolts
Be sure that the Wheel Assembly is parallel to the
Base and tighten with the Wrench.
J
Hardware Used: 2x
2
Attach the Post Supports
in the bottom of each Post Support with the hole on the
Base. Insert 1 Bolt through the hole in the support
and into the Base and hand tighten. Repeat with the other
2 Post Support and then tighten all
Hardware Used: 3x
Contact us for assistance: (866) 985-7877 | www.
Base back over the sandbox and align the holes in
K to Base J . Align holes in
Bolts
I to the Base J . Align the holes
with the Wrench.
Bolts
Base
Plastic Cap
Sandbox
5