Advertisement
www.wtliving.com
PREPARATION AND ASSEMBLY
Before beginning assembly, be sure to empty contents of carton and make sure all parts are present. If any parts are
missing, please contact Customer Service at cservice@welltraveled.net.
Place all parts on a soft, level surface for assembly. To properly assemble this heater, you will need a screwdriver. DO NOT
over tighten hardware!
1
Screw the Tube to the Base.
2
Lower the Head onto the Pole. Affix with 2 Screws at the
base of the Head.
3
Clip the Cable Clamp around the bottom of the Pole, then
secure the power cord into the Cable Clamp.
Your Tabletop Halogen Heater is ready to use.
Contact us for assistance: cservice@welltraveled.net
3
3
Advertisement
