Rotate The User Interface On The Transmitter (Optional) - Emerson Micro Motion 5700 Installation Manual

Mounting and sensor wiring
February 2020
4. Replace the clamp in its original position and tighten the cap screw. Torque to 28 in
3.6 Rotate the user interface on the transmitter
(optional)
The user interface on the transmitter electronics module can be rotated 90°, 180°, or 270°
from the original position.
Figure 3-15: Display components
A. Transmitter housing
B. Sub-bezel
C. Display module
D. Display screws
E. End-cap clamp
F. Cap screw
G. Display cover
20
lbf (3.16 N m) to 30 in lbf (3.39 N m).
Figure 3-14: Re-attachment of the sensor clamp
Micro Motion 5700 Transmitters with Configurable Outputs
Installation Manual
MMI-20027478