Figure 2-1 Rotating the transmitter on the sensor
Clamping ring
CAUTION!
Do not rotate the housing more than 360°. Excessive rotation can damage the wiring and
cause measurement error or flowmeter failure.
2.3
Rotating the user interface module on the
transmitter (optional)
For easier access, you can rotate the user interface module (whether or not the transmitter
has an LCD display) up to 360° in 90° increments.
WARNING!
Shut off power to the transmitter before you remove the housing cover in a hazardous area, as this
could cause an explosion.
To rotate the user interface module on the transmitter:
1. Remove power from the unit.
10
Feedthrough
Transmitter orientation and power supply
Feedthrough
notches
Model 2400S Transmitters